IBM Dock II, User Manual

Page: 138 / 170

You must exit Windows before running scsifmt. You cannot run the
utility from the Windows MS-DOS Prompt.
Press F1 to view online Help information for any scsifmt screen.
Press Esc to exit the Help screen.
1. Change to the directory where scsifmt.exe is located (the default
directory is c:\scsi) and enter scsifmt to start the program. The
following screen appears.
This utility allows you to format your SCSI disk drives attached to
your Adaptec SCSI Host Adapter.
- To learn more about this utility before continuing, press <F1>.
- To continue, press <ENTER>.
- To exit, press <ESC>.
The following Adaptec SCSI Host Adapter(s) have been found:
Adaptec AHA-1540/1542 - Port 330h
ENTER=Continue ESC=Exit F1=Help
%%% Adaptec SCSI Low-Level Formatter v1.3 %%%
scsifmt scans your computer for Adaptec SCSI host adapters and
displays information about them at the bottom of the screen. In
the above screen scsifmt found an AHA-1540/1542 host adapter at
port 330h.
2. Press Enter to continue. (You can also press F1 to view a Help
screen or press Esc to exit scsifmt.)
Next, scsifmt displays information about the installed SCSI
devices, as shown in the following figure.
122
IBM ThinkPad Dock II User's Guide
Title: C78JAMST CreationDate: 05/06/94 19:15:58