IBM Brocade FCoE Installation And User Manual Download Page 54 | Manualshive

Page: 54 / 76

background image

40

Brocade FCoE Switch Module for IBM BladeCenter: Installation and User Guide

Downloading the firmware

Once you have found the correct firmware you want to download to the Brocade FCoE Switch
Module, you can use either the CLI or Web Tools to do the download.

NOTE

The firmware download for the Brocade FCoE Switch Module is not non-disruptive. Be sure that no
traffic is flowing through the switch during the download process.

For specifics on how to perform the firmware download, please see the chapters regarding
firmware maintenance in the

Fabric OS Administrator’s Guide

if you are using the CLI to do the

download or the

Web Tools Administrator’s Guide

if you are using Web Tools.

Resetting and restarting the switch module

To activate the new image or images, you must reset the switch module. To reset the switch
module, complete the following steps:

1. From the I/O Module Tasks menu, click Admin/Power/Restart. The management module

window opens.

2. Select the I/O-module bay on which the firmware update was just installed.

3. Click Power Off Module(s).

4. Select the I/O-module bay on which the firmware update was just installed.

5. Click Power On Module(s). Wait 60 seconds for POST to be completed.

6. Click Monitors, and select Firmware VPD. The Firmware VPD window opens.

7. In the Firmware VPD window, locate the I/O Module Firmware VPD area.

Page down to the number of the I/O-module bay that contains the switch module that you just
installed; then, note the corresponding level of the firmware for the switch module. Confirm that the
firmware build ID and revision reflect the correct firmware release.

«
...
52
53
54
55
56
...
»

Summary of Contents for Brocade FCoE













































































Reviews:

No comments

Related manuals for Brocade FCoE

Brand: FANATEC Pages: 40

Brand: DANLERS Pages: 2

Allen-Bradley 194U Series

Brand: Rockwell Automation Pages: 2

Edge RTM-ATCA-F140

Brand: Penguin Pages: 2

Brand: Enttec Pages: 22

Brand: Cumberland Pages: 2

Enova DGX 100 Series

Brand: AMX Pages: 2

Brand: Emulex Pages: 75

Brand: Popp Pages: 9

Brand: Banner Pages: 8

Brand: SmartThings Pages: 2

Brand: Exsys Pages: 14

CUVEO CR-UPS2000

Brand: Me Pages: 44

Brand: Cables to Go Pages: 3

Brand: SALZ Pages: 2

Brand: Veris Industries Pages: 2

Brand: Rasfox Pages: 13

Brand: NETGEAR Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands