__ 4.
Remove the card and place it in a protective package.
__ 5.
Attention:
Adapter cards are fragile:
v
Handle only by the edges
v
Keep fingers off printed circuit area
v
Use static strap when handling
v
Leave in protective packaging until ready to install
__ 6.
Locate the adapter card you want to install in this position.
__ 7.
Align the adapter card with the card holders inside the system unit and
push until it is securely connected.
__ 8.
Swing the black latch in and move the blue latch clockwise or install the
screw to secure the card.
__ 9.
DANGER
To prevent a possible electrical shock from touching two surfaces with
different electrical grounds, use one hand, when possible, to connect or
disconnect signal cables. (RSFTD004)
Connect any cables and label the cables with the card position.
Figure 4. Example of 270 and 820 Card Latch
Moving a card already in your unit
17
Summary of Contents for AS/400e 270
Page 2: ......
Page 11: ...Figure 1 Example of 270 820 5075 Card Latch Before you begin 5...
Page 33: ......
