Notes:
a.
If the electronic customer support cable connects to
port 1 (right
connector)
on the 2745 card, remove it. The electronic customer support
cable installs into
port 0 (left connector)
on the 2745 card.
Port 1 (right
connector)
is available as a communications port.
b.
Be sure to label the cables with the correct location (for example,
slot
C06/port 0
).
__ 2.
Is there a card, other than the 2746 card, installed in position
C05 —270
System Unit
or
C03 first or C11 second—820 System Unit
?
No
Yes
↓
Before you remove the card from the system unit, you need to see if
you have an open position to install the card you removed in a
different position.
Look at the PCI card area. Are there any open positions?
Yes
No
↓
Use the following to help determine card placement.
v
Use the card placement tool available on the Internet at:
http://www.ibm.com/as400/cif
v
Go to the
PCI Card Installation Instructions
available on the
Internet at:
http://www.as400.ibm.com/tstudio/tech_ref/cif/index.htm
or the
Installation and Service Library CD
, SK3T-4028
v
Contact your authorized service provider or your
authorized dealer
Go to “Moving a card already in your unit” on page 15.
__ 3.
Attention:
Adapter cards are fragile;
use static strap when handling
,
handle only by the edges, and keep fingers off printed circuit area.
__ 4.
Install the new 2746 communications adapter card in one of the following
positions:
v
270 System Unit: C05
v
820 System Unit: C03 – first or C11 – second
Before you begin
3
Summary of Contents for AS/400e 270
Page 2: ......
Page 11: ...Figure 1 Example of 270 820 5075 Card Latch Before you begin 5...
Page 33: ......
