Switch and Jumper Locations
The component locations differ depending on the level of the adapter. However, the function and settings
of the jumpers and switches are the same.
Figure
2-1. Switch and Jumper Locations
Installation Procedure
To install the 8-port adapter, perform the following steps.
Review the precautions on handling static-sensitive devices (page 2-2).
Set the option switches and jumpers (starting on page 2-4).
Install the adapter (page 2-12).
Download the operating system support and diagnostic programs (page 2-13).
Run diagnostics to verify the installation (page 2-13).
Connect the optional cable (page 2-13).
Set up the configuration files (page 2-13).
Configuring the IBM ARTIC186 8-Port Adapter
Before installing the 8-port adapter in the computer, set the switches and jumpers on the adapter as
required for your installation. As you configure the adapter, record these settings in Table 2-1 on
page 2-3.
2-4
IBM ARTIC186 8-Port Adapter GTO
Summary of Contents for ARTIC186 II
