IBM ARTIC186 II, Manual To Operations, Page: 25 / 48

Chapter 3. Replacing the IBM ARTIC186 8-Port Adapter
Use these procedures to remove a failing adapter and install the replacement.
Removing the Adapter
Note: For instructions specific to your computer, refer to the hardware and service information that came
with your computer.
1. Turn off the computer.
2. Disconnect the power cords from the electrical outlets.
3. Disconnect all cables from the rear of the system unit.
4. Remove the system unit cover.
5. Open the card retainer by loosening the screw.
6. Remove the adapter retaining screw.

Copyright IBM Corp. 1997, 1999
3-1