38
CAUTION: There are two warnings with POST messages as below:
1. Checking NVRAM NVRAM is being checked to see if it is valid.
2. Update OK! NVRAM was invalid and has been updated.
Keyboard is locked
Keyboard Error
Keyboard Interface Error
Re-connect PS/2 keyboard and mouse.
Enter BIOS Setup and load the default
settings.
PS/2 keyboard
PS/2 mouse
System board
No boot device available
Re-connect with devices
Make Sure devices (FDD, HDD, CD/DVD-
ROM) are bootable.
Enter BIOS Setup and load the default
settings.
Reboot the system
NVRAM/CMOS/Password cleared by
Jumper
Turn off the system and remove the
jumper.
See “Power-On Password” on page 9.
<CTRL_N> pressed
CMOS is ignored and NVRAM is cleared.
Enter BIOS Setup and load the default
settings.
Table 2-1 POST Error Messages List
NOTE:
To diagnose a problem, first find the BIOS error messages in left column. If
directed to a check procedure, replace the FRU indicated in the check
procedure. If no check procedure is indicated, the first Action/FRU listed in right
column is the most likely cause.
BIOS Error Messages
Action/FRU
Summary of Contents for Aptiva 2174
