IBM 9306, Hardware Maintenance Manual

Page: 130 / 244

1. Ensure that a keyboard tray is properly installed in your rack cabinet (see
“Installing a keyboard tray” on page 119) with at least 2U of clearance above the
keyboard tray.
2. Install the flat panel monitor base on the flat panel monitor. See the
documentation that comes with your flat panel monitor rack mount kit for
detailed installation instructions.
3. Install the mounting studs and bumpers on the keyboard tray.
4. Attach the monitor base to the inside of the keyboard tray using the screws that
come with the rack mount kit.
5. Fold the monitor all the way down against the bumpers; then, slide the keyboard
tray into the rack cabinet to ensure that there is proper clearance.
6. See the flat panel monitor documentation for information on how to connect
power, and how to connect the monitor to a server or console switch.
Installing a monitor shelf
The monitor shelf can support a monitor that weighs up to 34 kg (75 lb), and
occupies 4U of space in your rack cabinet. Space is provided in the rear of the
monitor shelf so that you can install a console switch according to “IBM NetBAY
Console Switch” on page 121.
Note: The actual amount of space used in your rack cabinet depends on the height
of the monitor that you put on the shelf, in addition to the space taken by the
shelf itself. Some monitors might require up to 10U of space in your rack
cabinet.
Keyboard tray
Rear screws
Flat panel monitor
Mounting studs
Bumpers
Figure 39. Installing a flat panel monitor rack mount kit
120
Hardware Maintenance Manual: IBM PC Server/Enterprise Racks Types 9306, 9308