IBM 8687 - Eserver xSeries 440, Planning And Installation Manual

Page: 153 / 202

Chapter 5. Management
139
4. Upon completion of the analysis, Active PCI Manager recommends the best
slot to insert the adapter (if one is available with the right criteria), as shown in
Figure 5-9 on page 139. In our case it was slot 3 in the x440.
Figure 5-9 Hot Add adapter to slot 3
5. Click Finish to close the wizard.
6. From the slot view, select the slot that the Add Card Wizard recommended,
then right-click the slot and click Blink Slot, as shown in Figure 5-10.
Figure 5-10 Blink Slot