![background image](http://html2.mh-extra.com/html/ibm/8275-416/8275-416_user-manual_3419970131.webp)
Table 15. Special Keys and Commands Used with the Terminal Interface (continued)
Special Keys/
Text/Commands
Description
Function keys
F1
Takes you to the Help Menu.
F2
Toggles between the first item in the menu body and the
Command bar.
F3
Takes you back to the previous menu.
F4
This is the Save key and is used to save changed
configuration data. It is the same as going to the System
Utilities Menu and selecting Save Configuration Changes.
There is no undo after configuration changes have been
saved. Pressing F4 after making configuration changes
causes configuration changes to be automatically applied
(F4 is used to Apply and Save configuration changes).
MAC Addresses
v
MAC addresses are displayed and entered as 12 hexadecimal
digits in canonical format.
v
Any alphabetic character (A-F) is displayed as uppercase. When
you enter the MAC address, uppercase and lowercase characters
are accepted.
v
Any illegal characters for a MAC address are not accepted.
Uppercase Words in
the Menu
Identifies commands.
READ ONLY
When in the upper right corner of the panel, indicates that the
current user has read-only access.
UNSAVED DATA
When in the upper right corner of panel, indicates that there are
unsaved changes; and that any changes made since the last SAVE
was issued will not be retained across a power cycle.
SAVING DATA
After a SAVE is issued, indicates the Save is in process.
DATA SAVED
Save operation has completed successfully.
NEXT PAGE
Command used to display next panel.
PREV PAGE
Command used to display previous panel.
LOGOUT
Command used to end this login session.
CLEAR CTRS
Command used to set to 0 the counters associated with this panel.
SEND
Command used to begin sending pings.
APPLY
Command used to cause configuration changes to take effect. Apply
appears on the panel once a change has been made.
REFRESH
Command used to refresh the panel with the current status or
configured values.
MAIN MENU
Command used to display the Main Menu.
PREV MENU
Command used to display the previous menu.
HELP
Command used to display the Help Menu.
Appendix D. Interface Conventions for the Console
115
Summary of Contents for 8275-416
