![background image](http://html2.mh-extra.com/html/ibm/8275-416/8275-416_user-manual_3419970043.webp)
sends requests to a BootP or DHCP server until a response is received.
You must specify None, if you want to manually configure the switch with
the appropriate IP information. When this value is modified, you need to
issue a Save and then reset the switch in order for the new value to take
effect.
Web mode
Used to enable or disable access to the switch through the Web interface.
When enabled, you can login to the switch from the Web interface. When
disable is selected, you cannot login to the switch’s Web server. Specifying
Disable provides for more secure access to the switch. The default is
Enable.
Note: Disabling the Web interface will not disable Web sessions that are in
progress; no new Web sessions will be started.
Configuration Changes
This section describes how to make configuration changes, apply them, and retain
the changes across a power cycle of the switch. It also provides you with specific
information about making configuration changes using the terminal interface, Web
interface, and SNMP interface.
You make configuration changes by entering data for one or more items.
Configuration changes made by one user are also seen by other users who request
the same data. Be aware that information displayed may be old data if you do not
request the latest information before making any changes.
After you have make a configuration change and it is accepted:
v
Selecting APPLY causes the change on the current panel to be applied but not
retained across a reset or power cycle.
v
Selecting SAVE causes the change on the current panel to be applied and all
applied changes are retained across a reset or power cycle.
Making configuration changes using the terminal interface
This section provides information about making configuration changes, applying the
changes, and retaining the changes across a power cycle when using the terminal
interface.
Applying the configuration changes
On the terminal interface menus, field entries that can modified are enclosed in
either square brackets ([ ]) or angle brackets (< >).
Square brackets identify an item that you can change by typing in text. As soon as
you begin typing, the current value of the field is erased and is replaced by the new
text. You cannot perform insert or overwrite in the field. You can use the following
special keys while you are editing text fields:
v
Arrow keys: These are ignored when you are editing a text field. On a field
where you have made no modifications, use arrow keys to move the cursor to
the appropriate field indicated by the direction of the arrow key.
v
Backspace: Removes a character in front of the cursor.
v
Delete: Gives the same result as the Back Space.
v
Enter: The text is accepted and the cursor moves to the next field. On a text field
where you have made no modifications, Enter moves the cursor to the next field.
v
Esc: Stops editing the field and restores the original data.
Chapter 3. Configuring your switch
27
Summary of Contents for 8275-416
