IBM 8275-416, User Manual, Page: 98 / 156

Starting the Web Interface
Note: You must configure the IP address of the switch before using the Web
interface.
Follow these steps to bring up the switch Web interface:
1. Enter the IP address of the switch in the Web browser address field.
2. When the Login panel is displayed, enter the appropriate User Name and
Password. The User Name and associated password are the same ones used
for the terminal interface. Click on the Login button. The navigation tree is
displayed in Frame 2, and the System Description Menu is displayed in Frame
3.
3. Make your selection by clicking on the appropriate item in the navigation tree in
Frame 2.
Note: There is an inactivity timeout associated with a Web session. The timeout
value is the same one that is used for Telnet sessions.
Commands
The following command buttons are used throughout the Web interface panels for
the switch:
Undo Restores any changes made on the panel to their original value since the
last Apply or Save.
Save Implements and saves the changes you just made. Some settings may
require you to reset the system in order for them to take effect.
Figure 65. Web interface panel–example
82
8275-416 User’s Guide