4-12
8237 Hub Installation and Planning Guide
7
New or replacement RMON Daughter Boards do not include a memory SIMM.
To transfer any installed SIMM to the new RMON Daughter Board:
•
Disconnect the old SIMM from the RMON Daughter Board by compressing
the clip on each side of the SIMM, moving the top of the SIMM to a vertical
position and then lifting the SIMM up and out of its slot, as shown. See
Figure 4-10.
Figure 4-10. SIMM Removal
•
Install the new SIMM by sliding it into the slot and rotating the top to the
back, as shown. See Figure 4-11. Make sure that the clips snap into
place.
Figure 4-11. SIMM Replacement
8
Replace the cover by reversing the actions in step 2. Note that both sides of the
top cover fit inside the edges of the bottom cover.
9
Connect ac power by attaching the power cord to the 8237 and then to the ac
outlet.
Summary of Contents for 8237
