IBM 8237, Installation And User Manual

Page: 135 / 166

B-18
8237 Hub Installation and Planning Guide
SYNTAX INTEGER {
store-and-forward(1),
adaptive-cut-through(2),
adaptive-store-and-forward(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Setting this object to store-and-forward(1)
makes the FEM port receive the entire packet
before forwarding them.
Setting this object to adaptive-cut-through
makes the system forward the packets with cut-
through mode when the transmission quality of
the destination network allows. If the
transmission quality is bad, the FEM will use
store and forward mode to process the packets.
In this case, the object returns adaptive-
store-and-forward(5) as value. Setting the
object to adaptive-store-and-forward(5) is not
valid; ’snmpBadValue will be returned."
::= { basicFemEntry 6 }
basicFemSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Reflecting the speed of the FEM port. The line
speed is determined by the auto-negotiation
mechanism of the transceiver of the FEM port.
Currently, there are two values - 10000000
(10M) and 100000000(100M)."
::= { basicFemEntry 9 }
basicFemName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..12))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Mnemonic name of the FEM port."
::= { basicFemEntry 7 }
---
--- Basic Probe table
---
basicProbeTable OBJECT-TYPE
SYNTAX SEQUENCE OF BasicProbeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "RMON probe table information; the index is the
same as the index of basicGroupTable."
::= { basicGroup 3 }
basicProbeEntry OBJECT-TYPE
SYNTAX BasicProbeEntry
ACCESS not-accessible
STATUS mandatory
INDEX { basicProbeHubIndex }
::= { basicProbeTable 1 }
BasicProbeEntry ::= SEQUENCE
{
basicProbeHubIndex
INTEGER,
basicProbeType
INTEGER,
basicProbeHwVer