IBM 7380E1U Installation And User Manual Download Page 74

Page: 74 / 160

Opening the bezel media door

To open or remove the media door, complete the following steps:

1. Read the safety information that begins on page vii and “Installation guidelines”

on page 35.

2. Unlock the left-side cover.

Note:

You must unlock the left-side cover to open or remove the bezel. When

you lock the left-side cover, it locks both the cover and the bezel.

3. Press the button on the left edge of the bezel, and rotate the left side of the

bezel away from the server.

4. From inside of the top section of the bezel door, slide the blue tab up to unlock

the bezel media door; then, grasp the depressed area on the left side of the
media door and pull the door open.

IBM System x3500 M3 Type 7380: Installation and User’s Guide

Summary of Contents for 7380E1U

































































































































































Search results

Summary of Contents for 7380E1U

Reviews:

Related manuals for 7380E1U

Brands by name

Popular brands

IBM 7380E1U, Installation And User Manual

Search results

Summary of Contents for 7380E1U

Reviews:

Related manuals for 7380E1U

Brands by name

Popular brands