5.2.1 Setting Address Switches and Pins for the Manual-Plug Devices
Set the address switches and pins for the manual-plug devices before installing them in the media bays. The addresses vary with the
location of the devices in the 7131 Storage Tower (see Figure 5-2).
The information in Figure 5-2 is on a label on the inside of the 7131 Storage Tower front cover.
Note: If you are installing a second 7131 Storage Tower, the SE/DIFF card automatically translates the device addresses. For example,
if you install a device in the lower media bay of a second 7131 Storage Tower, set the address to 5. The SE/DIFF card translates this to
address 13. See "Setting the Address Jumper for a Second 7131 Storage Tower" in topic 3.2 for more information.
7131-105 User's Guide
Setting Address Switches and Pins for the Manual-Plug Devices
¦ Copyright IBM Corp. 1995, 1996
5.2.1 - 1
