3.9 Relocating the 7131 Storage Tower
1. DANGER
+--------------------------------------------------------------------+
¦ To prevent a possible electrical shock when adding or removing any ¦
¦ devices to or from the system, ensure that the power cords for ¦
¦ those devices are unplugged before the signal cables are connected ¦
¦ or disconnected. If possible, disconnect all power cords from the ¦
¦ existing system before you add or remove a device. (RSFTD203) ¦
+--------------------------------------------------------------------+
CAUTION:
The weight of this part or unit is between 18 and 32 kilograms (39.7
and 70.5 pounds). It takes two persons to safely lift this part or
unit. (RSFTC204)
2. Attention: Damage as a result of improper handling during the relocation of a 7131 Storage Tower may result in loss of data or
possibly a system fault.
3. Logically remove all 7131 Storage Tower devices from your system configuration; refer to your system publications on how to remove
devices from your system configuration.
4. Perform a controlled system shutdown.
5. Power off the 7131 Storage Tower.
6. Disconnect the power cord from the 7131 Storage Tower.
7. Move the 7131 Storage Tower to the desired location.
Subtopics
3.9.1 Disconnecting the SCSI Signal Cable and SCSI Terminator
7131-105 User's Guide
Relocating the 7131 Storage Tower
¦ Copyright IBM Corp. 1995, 1996
3.9 - 1
