3.5 Setting the Voltage Selection Switch
The voltage selection switch is located on the back of the 7131 Storage Tower (see Figure 3-13).
1. Attention: Do not connect the line cord until the voltage selection switch is properly set, or the power supply could be damaged.
2. Move the switch to the 115V setting if appropriate for your application.
3. Move the switch to the 230V setting if appropriate for your application.
Figure 3-13. Voltage Selection Switch
7131-105 User's Guide
Setting the Voltage Selection Switch
¦ Copyright IBM Corp. 1995, 1996
3.5 - 1
