IBM 6400 Series, Maintenance Information Manual

Page: 412 / 422

412
101 UPPER DRIVER SHORT, 91
102 LOWER DRIVER SHORT, 91
105 HAMMER COIL OPEN, 91
107 HAMMER COIL HOT, 92
110 STACK OVERFLOW / SEE USER’S GUIDE,
93
111 STACK UNDERFLOW / SEE USER’S GUIDE,
93
112 UNDEFINED OPCODE / SEE USER’S GUIDE,
93
113 PROTECTED INSTRUCTION / SEE USER’S
GUIDE, 93
114 ILLEGAL OPERAND ACCESS / SEE USER’S
GUIDE, 93
115 ILLEGAL INSTRUCTION ACCESS / SEE
USER’S GUIDE, 93
116 ILLEGAL EXTERNAL BUS ACCESS / SEE
USER’S GUIDE, 94
117 A TO D OVERRUN / SEE USER’S GUIDE, 94
118 UNDEFINED INTERRUPT / SEE USER’S
GUIDE, 94
119 TCB CORRUPTED / SEE USER’S GUIDE, 94
120 ACCESS NULL POINTER / SEE USER’S
GUIDE, 94
121 PAPER NOT AT SPEED / SEE USER’S
GUIDE, 94
122 PAPER NOT SCHEDULED / SEE USER’S
GUIDE, 95
123 PAPER BUSY TOO LONG / SEE USER’S
GUIDE, 95
124 PAPER FIFO OVERFLOW / SEE USER’S
GUIDE, 96
125 PAPER FIFO UNDERFLOW / SEE USER’S
GUIDE, 96
126 PAPER FEED BAD TABLE / SEE USER’S
GUIDE, 97
127 PAPER FEED ILLEGAL STATE / SEE USER’S
GUIDE, 97
128 PAPER FEED INVALID COMMAND / SEE
USER’S GUIDE, 97
129 PAPER FEED INVALID PARAMETER / SEE
USER’S GUIDE, 97
130 PAPER FEED PARTLY ENERGIZED / SEE
USER’S GUIDE, 97
131 PAPER FEED INTERRUPT / SEE USER’S
GUIDE, 98
132 RIBBON INVALID COMMAND / SEE USER’S
GUIDE, 98
133 RIBBON INVALID STATE / SEE USER’S
GUIDE, 98
134 PLATEN INVALID COMMAND / SEE USER’S
GUIDE, 98
135 PLATEN INVALID STATE / SEE USER’S
GUIDE, 98
136 PLATEN INVALID PARAMETER / SEE
USER’S GUIDE, 98
137 SHUTTLE INVALID COMMAND / SEE
USER’S GUIDE, 99
138 SHUTTLE INVALID PARAMETER / SEE
USER’S GUIDE, 99
139 SHUTTLE OVERSPEED / SEE USER’S
GUIDE, 99
990 MACHINE CHECK, 99
998 NON-VOLATILE MEMORY FAILED, 99
A
A97 GRAPHIC CHECK ERROR / PRESS STOP
THEN START, 99
Abbreviations, 347
About the printer, 13
Acronyms, 347
Adapters and Cords, 355
Adjustments, 151
coil temperature, 181
end of forms distance, 169
Ethernet initialization, 183
hammer phasing, 173
loading flash memory, 176
paper drive motor pulley alignment, 158
paper feed timing belt tension, 154
paper scale, 160
platen gap, 162
platen open belt, 156
platen open motor pulley alignment, 164
ribbon guide, 166
set shuttle speed, 182