IBM 6343, Hardware Maintenance Manual

Page: 67 / 230

Chapter 4. Installing Options
59
5. Thread the cable through the Rope Clip and around an object that is not a part of
or permanently secured to the building structure or foundation, and from which
it cannot be removed; then fasten the cable ends together with a lock.
Replacing the cover and connecting the cables
After working with options, you need to install any removed parts, replace the cover,
and reconnect any cables, including power cords and telephone lines. Also,
depending on the option that is installed, you might need to confirm the updated
information in the IBM Setup Utility program.
To replace the cover and connect cables to your computer:
1. Ensure that all components have been reassembled correctly and that no tools or
loose screws are left inside your computer.
2. Clear any cables that might impede the replacement of the cover.
3. Position the cover on the chassis so that the rail guides on the bottom of the cover
engage the rails and push the cover closed until it latches.
򍦠
1
򐂰
Rope Clip
򍦠
2
򐂰
Bolt holes
򍦠
3
򐂰
Nuts
To work with another option, go to the appropriate section.
What to do next: