IBM 6343, Hardware Maintenance Manual

Page: 38 / 230

30
IBM : Hardware Maintenance Manual
• DIMM heights of 38.1 mm (1.5 inches)
To install a DIMM:
1. Remove the cover. See “Removing the cover” on page 26.
2. To locate the DIMM connectors. See“Identifying parts on the system board” on
page 28.
3. Open the retaining clips.
4. Make sure the notches in the DIMM align with the tabs on the connector. Push or
insert the DIMM straight down into the connector until the retaining clips close.
Installing adapters
This section provides information and instructions for installing and removing
adapters. Your computer has three expansion slots for PCI adapters and one slot used
for an AGP adapter. Adapters must be low profile. Your computer supports adpaters
up to 168 mm (6.6 inches) long.
To install an adapter:
1. Remove the cover. See “Removing the cover” on page 26.
Notches
• To work with another option, go to the appropriate section.
• To complete the installation, go to “Replacing the cover and connecting the
cables” on page 36.
What to do next: