IBM 6.1.8.2 Hardware Planning And Installation Manual Download Page 80

Page: 80 / 114

Figure 35. Securing the server on the rack

Installing and connecting the management server for an IBM Elastic Storage

System

Learn how to install and connect the management server for an IBM Elastic Storage System .
Use the information provided in the table to install and connect an IBM Storage Scale System Utility Node

(MTM 5149 - 23E).

Table 20. Ports on the utility node
Item

number

Feature

Description

Riser C

Provides for riser card C to plug in CX-6 network adapter.

CX-6 VPI adapter (FC

AJZL)

Provides two port high-speed cluster management for Ethernet or

InfiniBand connection.

Riser D

Provides for riser card D to plug in 4-port 10 GbE adapter.

4-port 10 GbE adapter

(FC EN2X)

60 IBM Storage Scale System Utility Node: Hardware Planning and Installation Guide

Summary of Contents for 6.1.8.2



















































































































Search results

Summary of Contents for 6.1.8.2

Reviews:

IBM 6.1.8.2, Hardware Planning And Installation Manual, Page: 80 / 114

Search results

Summary of Contents for 6.1.8.2

Reviews: