manualshive.com logo in svg

IBM 6.1.8.2, Hardware Planning And Installation Manual, Page: 101 / 114

Share
Download
IBM 6.1.8.2 Hardware Planning And Installation Manual Download Page 101

Accessibility features for the system

Accessibility features help users who have a disability, such as restricted mobility or limited vision, to use

information technology products successfully.

Accessibility features

The following list includes the major accessibility features in IBM Storage Scale RAID:
• Keyboard-only operation
• Interfaces that are commonly used by screen readers
• Keys that are discernible by touch but do not activate just by touching them
• Industry-standard devices for ports and connectors
• The attachment of alternative input and output devices
IBM Documentation, and its related publications, are accessibility-enabled.

Keyboard navigation

This product uses standard Microsoft Windows navigation keys.

IBM and accessibility

See the IBM Human Ability and Accessibility Center (www.ibm.com/able) for more information about the

commitment that IBM has to accessibility.

©

 Copyright IBM Corp. 2022, 2023

81

Summary of Contents for 6.1.8.2



















































































































Reviews:

No comments