IBM 4851 514, Planning, Installation And Service Manual

Page: 40 / 162

Note: Acquire the four mounting screws before you begin this installation.
1. For a free-standing unit, ensure that the four rubber feet
H
are installed on
the bottom of the countertop integration tray (as shown in Figure 19 on page
26).
2. To secure the countertop integration tray to a countertop, perform the following
steps:
a. Detach the plastic fence from the countertop integration tray. To detach the
plastic fence:
1) Spread the rear sides away from the tray as shown in Figure 17.
2) Alternating from side to side, slide the plastic fence
B
about 7 mm
(0.25 in.) until the plastic fence is detached from the metal integration
tray
A
, as shown in Figure 18 on page 25.
441.52 mm (17.38 in.)
343.02 mm (13.51 in.)
64.1 mm (2.52 in.)
90 mm
(3.54 in.)
7 mm
(0.28 in.)
66.22 mm
(2.6 in.)
40.72 mm
(1.6 in.)
149 mm
(5.87 in.)
128 mm
(5.04 in.)
95 mm
(3.7 in.)
260.16 mm
(10.24 in.)
66.22 mm
(2.6 in.)
45.76 mm
(1.8 in.)
340 mm
(13.39 in.)
Figure 16. Countertop integration tray pattern with display and countertop cutout on right side
Figure 17. Detaching the fence from the tray
Mounting the SurePOS 500 Model 514
Updated October, 2008
24
SurePOS 500 Model 514