IBM 4002AC2, Installation And User Manual

Page: 39 / 82

2. Place the Network switch on a hard flat surface with the front panel facing you.
3. Attach a rack-mount bracket to one side of the Network switch with the supplied
screws. Then attach the other bracket to the other side.
Attention: Make sure you use the screws supplied with the mounting
brackets. Using the wrong screws could damage the B24X and would invalidate
your warranty.
Figure 5 shows how to attach the short mounting brackets.
4. Mount the device in the rack as illustrated in Figure 6.
Note: Although Figure 6 shows a device with short mounting brackets, the
procedure for securing a device with long mounting brackets is the same.
5. Proceed to “Powering on the system” on page 14.
netx005
Figure 5. Attaching the short mounting brackets
netx006
Figure 6. Installing the device in a rack
Chapter 2. Installing the B24X
13