IBM 3160, Introduction And Planning Manual

Page: 75 / 102

PSF/VSE Support
To use resident fonts, identify them to PSF/VSE using the APSRMARK utility.
Resident fonts are not supported when using DFP.
PSF/VM Support
PSF/VM does not support resident fonts. However, you can print with
fully-described downloaded fonts.
0S/400 and PSF/400 Support
Ÿ
Version 3.1:
– Requires a PTF for native 3160 and InfoPrint 60 support
– Supports Basic N_Up but not Enhanced N_Up
– Requires a PTF for DBCS resident font support
Ÿ
Version 3.0.5:
– Requires Cum Tape C4263305
– Does not support N_Up or Enhanced N_Up
– Configure the printer as a 3935
– Supports outline font scaling only for whole font sizes (for example, 10, 12,
15 CPI ...)
Ÿ
Version 2.3
– Requires Cum Tape CA193230
– Requires PTF C4193230
– Does not support N_Up or Enhanced N_Up
– Configure the printer as a 3935
– Supports outline fonts scaling only for whole font sizes (for example, 10,
12, 15 CPI ...).
Ÿ
Version 2.2
– This version went out of service on 31 March 95; it is included for reference
only.
– Requires PTF SF16030 and SF16187.
– Only letter (8.5 X 11 in.) and legal (8.5 X 14 in.) size paper are supported.
– IBM AFP Multiple-up page capability is not supported. Multiple-up page
capability is available only by using the OS/400 function.
– Only the printer default output stacker (the top stacker) is supported.
– Supports outline font scaling only for whole font sizes (for example, 10, 12,
15 CPI ...).
Ÿ
Printing with the large print function for OfficeVision/400 on the AS/400 is not
supported by these printers, nor is the AS/400 (DDS) key word CHRSIZ
function.
Ÿ
Bolding is not supported on the following fonts when using OfficeVision/400 or
the AS/400 (DDS) key word HIGHLIGHT function: Boldface, Gothic Text,
Gothic Katakana, OCR A, OCR B, Prestige Italic, or fonts that are already
bold-faced fonts.
Appendix B. Software and Hardware Requirements
61