IBM 2858-A10, Installation And Setup Instructions

Page: 7 / 28

Installation and setup instructions
Use these instructions to install and set up your N6000 series filer.
Unpacking the N6000 series filer
Use these instructions to unpack the N6000 series filer.
Important: If your system was shipped already assembled and cabled in a rack, go directly to “Setting
up and booting the system” on page 17.
Your system is shipped with an accessories box containing documentation and hardware parts for
installing your system. See Figure 1. The quantity of hardware parts is determined by your system
configuration and requirements.
1
IBM rail kit
2
Software license
3
Installation and Setup Instructions
4
Console adapter, one per node
5
Serial null modem cable, one per node
6
Fibre Channel cables (quantity depends on the number of loops ordered)
7
Rear tie-down bracket
8
Bezel
9
Setup kit containing loopback plugs, grounding kit, and general information kit
10
Cable management tray, one per node
5
6
7
8
9
1
2
3
4
10
n600001
Figure 1. N6000 series filer accessories
© Copyright IBM Corp. 2008, 2011
1