Front View
Figure 1 shows the front view of the 7206 Tape Drive.
1
Status lights
3
Power switch
2
Unload button
4
Power on light
Operator Controls
The 7206 Model 220 4mm Tape Drive has the following operator controls.
Power Switch
The power switch (
3
in Figure 1) is a push button switch that enables the power
to be turned on or off. Push and release the button to turn the power on, when it
is off, or off when it is on. When the 7206 Tape Drive is on, the power-on light
4
is on.
Note:
The
symbol located beside the power switch is an International
Organization for Standardization (ISO) symbol for a push button switch.
Unload Button
The unload button
2
enables the tape cartridge to be ejected. The unload button
operates only when the 7206 Tape Drive power is on. To remove a cartridge, press
and hold the unload button for about one second.
Figure 1. Front View of the 7206 Model 220 4mm Tape Drive
2
7206 Model 220 Service Guide
|||||
||||
|
|
|
|
|
|
Summary of Contents for 220
