IBM 220, Service Manual

Page: 13 / 68

About This Guide
Attention: Before attempting to work with the 7206 Tape Drive or using any of
the information in this guide, perform the safety inspection procedures described
in “Appendix C. Safety Inspection Procedures” on page 47.
Chapter 1, “Reference Information,” describes the operator controls, indicator
lights, connector locations, and hardware specifications of the 7206 Tape Drive. It
also tells how to clean the tape drive.
Chapter 2, “Using the Media,” describes the media to use in the 7206 Tape Drive.
Chapter 3, “Maintenance Analysis Procedures,” provides the maintenance analysis
procedures (MAPs) required to service the 7206 Tape Drive.
Chapter 4, “Removal and Replacement Procedures,” provides the removal and
replacement procedures required to service the 7206 Tape Drive.
Chapter 5, “Parts Diagram and Parts List,” provides a parts diagram and parts list
required to service the 7206 Tape Drive.
Appendix A, “Power Cables,” provides power cable information for different
countries.
Appendix B, “Safety Inspection Procedures,” provides steps to identify unsafe
conditions before working with the 7206 Tape Drive.
Store this guide with your system manuals.
Related Publications
v
7206 Model 220 4mm Tape Drive Setup and Operator Guide, SA26–2006, provides
information about installing and operating the 7206 Model 220 Tape Drive.
v
IBM Externally Attached Devices Safety Information manual, SA26-2004, provides
translations of danger notices.
© Copyright IBM Corp. 2000
xi