Copyright Velocomp LLP 2005-2014
16
have its own ANT+ speed/cadence sensor and unique ANT+ wireless ID.
Your Newton memorizes your wireless IDs, storing each ID (and other bike and rider
information) in one of four separate “Profiles”.
TIP
: THE NEWTON IS SET TO PROFILE 1 WHEN SHIPPED FROM THE FACTORY
To use your Newton with more than one bike, you will create a separate Profile for each
bike. For example, Profile 1 might be your road bike; profile 2, your TT bike; profile 3,
your mountain bike. It’s completely up to you!
To set up a new bike you will:
1)
Use ISAAC “Device/Set Up Newton...” to select a new profile, then enter user
information, and finally select desired calibration accuracy
2)
Pair your ANT+ sensors to your new profile
3)
Start riding, or, if you chose “best accuracy”
4)
Perform a “Cal Ride”
SETTING UP A NEW BIKE
1)
Connect your Newton to your computer and launch ISAAC software (see ISAAC
directions separately for installation/usage of ISAAC software)
2)
Using ISAAC Software, “Device/Set Up Newton...”
3)
Select the Profile you’d like use for your new bike. Choose profile 2, 3, or 4 (Profile
1 has already been used for your first bike; in this example a Road Bike).
4)
Select your profile number type in its name (in example above, Profile 2, “Race
Bike”)
5)
Click the Next button and enter your bike and rider information as instructed by the
“Set Up Newton” windows.
6)
On the last screen, choose between “Better Accuracy” and “Best Accuracy”. Best
Accuracy requires a Cal Ride, described on pages 11-12.
7)
Now, for your new Profile perform the sensor Scan described on page 17
.
16
