ibidi Heating System, Universal Fit
• Only ibidi technical staff and technical staff instructed by ibidi are permitted to open and ser-
vice the ibidi Heating System, Universal Fit.
• The external power supply should not be brought into contact with moisture. If the housing is
damaged, the external power supply should not be used.
• Avoid strong magnetic fields and sources of high frequency. The ibidi Heating System, Univer-
sal Fit might not function properly when located near a strong magnetic field or high frequency
source.
• Avoid vibrations from vacuum pumps, centrifuges, electric motors, processing equipment, and
machine tools.
• Avoid dust and corrosive gas. Do not install the ibidi Heating System, Universal Fit where it
could be exposed to high levels of dust or to outside air or ventilation outlets.
• Install the ibidi Heating System, Universal Fit in a horizontal and stable position, such as a
table, bench, or desk upon which the instrument is installed.
• Install the ibidi Heating System, Universal Fit in a location that enables easy access for mainte-
nance.
• Do not place heavy objects on the instrument.
• The heated glass plates of the incubation chamber can break on mechanical impact. If so, the
glass shards can lead to injuries if handled.
• Be aware that when switched on, a 10 V DC voltage is applied to the underside of the glass on
the Heated Lid. Do not touch the underside or put it in contact with anything conductive. This
could cause a short circuit that may damage the Temperature Controller and/or the Heating
Devices.
1.7
Regulatory Statement
The ibidi Heating System, Universal Fit has been designed, produced and tested in compliance with
the European standard DIN EN 61010-1 (IEC 61010-1, ”Safety requirements for electrical equipment
for measurement, control and laboratory use”). Furthermore it meets the IEC 61326-1 (”Electrical
equipment for measurement, control and laboratory use - EMC requirements”) and CISPR 11 (”Inter-
national Standard for electromagnetic emissions (disturbances) from Industrial, Scientific and Medi-
cal (ISM) Equipment”) standards .
The device carries the CE mark.
The ibidi Heating System, Universal Fit meets the Low Voltage Directive 2014/35/EU and the
EMC Directive 2014/30/EC.
Instruction Manual
11
Version 2.2 (May 23, 2019)
