27
TRT33A Getting Started
If you want to delete specific Test Records, choose CLEAR TEST RECORDS and enter desired range to
be deleted. Press
SET
to scroll between FROM and TO positions. The results that are located in the
range between these locations, including the two selected locations, will be deleted.
To delete all memory, choose CLEAR ALL MEMORY and press
ENTER
. After the deletion, the following
message will be displayed:
5.6
Printing the Test Results
The results can be printed using
. The measurement results can be printed from
MEM
menu. The
test results from actual reading can be printed by pressing
. Press
START+PRINT
simultaneously to
print all measurements from actual Test Record.
Note:
It is not possible to print test results on the built-in printer from DV-Win software. If it is attempted
the device will be blocked, and reset of device is necessary.
Figure 5-37: Printout for single-phase transformer tested
Figure 5-38: Printout for three-phase transformer tested
Figure 5-36: The message
after deleted results
Figure 5-35:
Delete specific range of Test
Records from memory
