IBC V-10, Manual, Page: 33 / 103

Operational settings in the Setup Menu
Mode Setting Description
Temp.
Range
Default
Reset
Heating
Emitter Enter the device type used to emit heat:
high mass radiant system, low mass radiant
system, air handler, cast radiator, or
baseboard. high mass
radiant
system
Design
Supply° Desired boiler outlet temperature on the
coldest day 95 °F-185 °F 125 °F
Maximum
supply° Maximum water temperature limit to prevent
overheating 41 °F-190 °F 140 °F
Minimum
Supply° Starting outlet water temperature 70 °F-147 °F 80 °F
Design
outdoor -76 °F-86 °F 14 °F
Priority Priority of the Reset Heating load against
other loads Very Low-
Very High Low
Pump post
Purge Time (seconds) the pump will operate after
satisfying call for heat 0-900
seconds 0
Summer
Shutdown° Cut-off level for outdoor temperature that
prevents further heating 32 °F-122 °F 65 °F
Setpoint Boiler
Supply° Desired or target outlet water temperature 59 °F-185 °F 130 °F
Maximum
Supply° Temperature limit to prevent overheating of
outlet water 41 °F-190 °F 145 °F
Summer
Shutdown° Cut-off temperature level that prevents
further heating. 32 °F-122 °F 65 °F
Priority Priority of the Set Point load against other
loads Very Low-
Very High High
Pump Post
Purge Time (seconds) the pump will operate after
satisfying call for heat 0-900
seconds 0
Ext.
Control Burner On
From Type of control used to control boiler supply
of heat. Thermostat
or Ext.
Control Thermostat
Max.
Control°
(9.5VDC) Temperature limit per maximum voltage
sent to the controller 32 °F-185 °F 160 °F
31
2.9 Operational settings in the Setup menu: temperature ranges and defaults