__________________________________________________________________________________________________________
Ibath è un marchio Trem srl
Via delle Crede, 10/F - 33170 Pordenone (PN)
–
Italia
Tel. +39 0434 610 782 E-mail
C.F. e P.I. 01280430933
Fan Timer Setting
1.
When the current mode is set on “Pilot-Wire”, “Comfort”, “Night”, “Antifreeze” or on “Clock”, by pressing the
"Fan" button once, the Fan symbol will be displayed and the Fan Timer 15min symbol will flash. Set then the fan
timer 15min / 30min / 45min / 60min by using the "Plus" or "Minus" buttons.
3 seconds without pressing any buttons and the current setting will be automatically confirmed – also,
temperature and “fan” symbol will be displayed.
By pressing the “Fan” button again, the symbol will disappear and the function will be deactivated (Fig. 4)
2.
When the current mode is set on “2-Hours mode” or “Stand-by”, by terminating the “fan timer” setting, the time
countdown will be displayed.
By pressing the “Fan” button again, the symbol will disappear and the function will be deactivated. (Fig 5)
Time and program setting
1.
In any mode, by pressing the “Date” button, the date will start flashing – the user will then be able to set the
current date by using the "Plus" or "Minus" buttons. The daily program will also be displayed.
By pressing the "Mode" button, the hour section will start flashing and the user will be able to set the current
hour by using the "Plus" or "Minus" buttons.
By pressing the "Mode" button again, the minutes section will start flashing and the user will be able to set the
minutes by using the "Plus" or "Minus" buttons.
2.
When the Minutes section is flashing, by pressing the “Mode” button, the user may proceed to set the Monday
program and the “0 time” point will start flashing. The user may then use the “Plus” or “Minus” buttons to set
the “Comfort temperature” or “Night temperature” to current time (by pressing “Plus” the point indicating that
at the current time the “Comfort temperature” mode will be activated. While by pressing the "Minus" button, the
point will disappear to indicate that at current time the “Night temperature” mode will be activated.
Subsequently, the point of the following hour will flash in the same way for the setting.
By pressing the “Mode” button again, the subsequent day will be displayed and the user will be able to set, in the
same way, the modes for the hours from 0 to 23. (Fig 6)
