____________________________________________________________________________
__________________________________________________________________________________________________________
Ibath è un marchio Trem srl
Via delle Crede, 10/F - 33170 Pordenone (PN)
–
Italia
Tel. +39 0434 610 782 E-mail
C.F. e P.I. 01280430933
Switching Modes
a.
Once the batteries are installed, the LCD display will be showing all symbols for 3 seconds.
After this, go to the “Date and time settings” interface –
the date will be flashing, the user will then be able
to set the date by using the “Plus” or “Minus” buttons.
Press then the “Mode” button
-
the “Hour” will be flashing –
set current hour by usin
g the “Plus” or “Minus”
buttons.
Then press the “Mode” button once again –
the minutes section will be flashing
–
set current minute by using
the “Plus” or “Minus” buttons once again.
Press the “Mode” button again to terminate the Minutes setting and to switch to stand
-by mode. While
“Date” is flashing, if the user does not wish to set any parameter, just press the "Stand
-by" button to switch
to stand-by mode immediately.
(Fig. 1)
b.
O
nce date/hour/minutes are set and once having switched to “stand
-
by” mode, press the “Stand
-
by” button
-
the remote control will switch to “Comfort” mode.
Symbol
Mode
Function Description
Fil-pilot
The temperature of the appliance is controlled by the pilot-wire
Comfort
The temperature of the appliance is controlled by the “Comfort mode”
settings
Night
The temperature of the appliance is controlled by the “Night mode”
settings
2 hr timer
The appliance heats up the room at maximum power
Clock
The temperature of the appliance is controlled by the mode of either the
“comfort” or “night” programs
Fan
Allows the Fan to operate for 15/30/45/60 minutes
Stand-by
The appliance is not in operation
Lock
Locks the keypad of the appliance
