____________________________________________________________________________
__________________________________________________________________________________________________________
Ibath è un marchio Trem srl
Via delle Crede, 10/F - 33170 Pordenone (PN)
–
Italia
Tel. +39 0434 610 782 E-mail
C.F. e P.I. 01280430933
•
During normal operation the surface of the appliance may reach high temperatures which can cause burns.
•
Combustible or flammable materials and pressurized containers (sprays, fire extinguishers, etc.) must be kept at a
distance of at least 50cm from the appliance.
•
Do not touch the appliance with wet hands or feet.
•
The appliance must not be used if the crystal glass is damaged.
•
It is important not to cover the appliance at any time in order to avoid dangerous overheating. (Fig. 6)
4. Control panel (touch screen)
Control panel with symbols and functions (Fig. 7)
T1
STAND-BY........................................................................
L1
T2
Low-temperature heating (50°c) …................................
L2
T3
Medium-temperature heating (70°c) …..........…............
L3
T4
Maximum-temperature heating
(90°c) …......................
L4
T5
Maximum-temperature 2-hours boost .........................
L5
T6
Keypad Lock..................................................................
L6
L7
Red LED indicates radiator is heating up
L8
Appliance in tension
S1
Infrared sensor for remote control
The IBATH radiators are equipped with an advanced control system with touch-screen controls and light indicators which
indicate the set function.
Changes in settings are also remarked by an acoustic signal.
•
When connecting
the power supply, all the LEDs light up for 2 seconds and you will hear a long “beep”. After this, only
L1 and L8 will remain on.
•
Touch T2 if you wish to heat up the room at low temperature. The L2 and L7 green LEDs will light up and you will hear
a “beep”. When the surface of the radiator reaches the set temperature, L7 switches on and off cyclically in order to
maintain the set temperature.
•
Touch T3 if you wish to heat up the room at medium temperature. The L3 and L7 green LEDs will light up and you will
hear a “beep”. When the surface of the radiator reaches the set temperature, L7 switches on and off cyclically in order
to maintain the set temperature.
•
Touch T4 if you wish to heat up the room at maximum temperature. The L4 and L7 green LED will light up and you will
hear a “beep”. When the surface of the radiator reaches the set temperature, L7 switches on and off cyclically in order
to maintain the desired temperature.