20
OFP Panel PC Series User Manual
2.2 Setting the Jumpers
Configure the jumpers with the settings required to be able to use the features
needed for your application. Contact your supplier if you have doubts about the
best configuration for your use.
Jumpers are short-length conductors consisting of several metal pins with a
non-conductive base mounted on the circuit board. Jumper caps are used to
have the functions and features enabled or disabled. If a jumper has 3 pins,
you can connect either PIN1 to PIN2 or PIN2 to PIN3 by shorting with the
jumper cap.
A 3-pin jumper
A jumper cap
Refer to the illustration below to set the jumpers.
Pin closed
Oblique view
Illustration
Open
1-2
2-3
When two pins of a jumper are encased in a jumper cap, this jumper is
closed
,
i.e. turned
On
.
When a jumper cap is removed from two jumper pins, this jumper is
open
, i.e.
turned
Off
.
Pin#
1
2
3
1 2 3
1 2 3
1 2 3
Summary of Contents for OFP-151-PC
Page 1: ...OFP 151 PC OFP 2100 PC OFP 2101 PC Open Frame Panel PC User s Manual Version 1 0 January 2021...
Page 10: ......
Page 16: ...6 OFP Panel PC Series User Manual OFP 2100 PC Unit mm Dimensions 543 x 334 x 88 2...
Page 21: ...General Information OFP Panel PC Series User Manual 11 1 This page is intentionally left blank...