background image

 

 

 

iv 

OFP Panel PC Series User Manual

 

Green IBASE 

 

This product complies with the current RoHS restrictions that prohibit 
the use of the following substances in concentrations exceeding 0.1% 
by weight (1000 ppm) except for cadmium, limited to 0.01% by weight 
(100 ppm). 
• 

Lead (Pb) 

• 

Mercury (Hg) 

• 

Cadmium (Cd) 

• 

Hexavalent chromium (Cr6+) 

• 

Polybrominated biphenyls (PBB) 

• 

Polybrominated diphenyl ether (PBDE)

 
 

 

Important Safety Information 

Carefully read the precautions before using the device. 

 

Environmental conditions: 

  Put the device horizontally on a stable and solid surface during installation in case 

the device may fall, causing serious damage. 

  Leave plenty of space around the device for ventilation. 

  Use this product in environments with ambient temperatures between 0˚C and 

40˚C. 

  DO NOT LEAVE THIS DEVICE IN AN ENVIRONMENT WHERE THE STORAGE 

TEMPERATURE MAY BE BELOW -20° C OR ABOVE 60° C. To prevent from 
damages, the device must be used in a controlled environment.   

  Keep the device away from humidity to avoid fog or condensation from 

accumulating on the inner surface of the panel. 

Care for your IBASE products: 

  Before cleaning the device, turn it off and unplug all cables in case a small amount 

of electrical current may still flow. 

  Use neutral cleaning agents or diluted alcohol to clean the device chassis with a 

cloth. Then wipe the chassis with a dry cloth. 

  Use a computer vacuum cleaner to remove dust to prevent the air vent or slots 

from getting clogged. 

 

 

Summary of Contents for OFP-151-PC


































































































































Reviews: