BIOS SETUP
46
MB880 User’s Manual
KB Power ON Password
This field allows users to set the password when keyboard power on is
the mode of the Power ON function.
Hot Key Power ON
This field sets certain keys, also known as hot keys, on the keyboard that
can be used as a ‘switch’ to power on the system.
Onboard FDC Controller
Select
Enabled
if your system has a floppy disk controller (FDC)
installed on the board and you wish to use it. If you install an add-in FDC
or the system has no floppy drive, select Disabled in this field. This
option allows you to select the onboard FDD port.
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and
their addresses. The default values for these ports are:
Serial Port 1
3F8/IRQ4
Serial Port 2
2F8/IRQ3
Serial Port 3
2F0/IRQ11
Serial Port 4
2E0/IRQ10
Parallel Port
378H/IRQ7
UART Mode Select
This field determines the UART 2 mode in your computer. The default
value is
Normal
. Other options include
IrDA
and
ASKIR
.
Parallel Port Mode
This field allows you to determine parallel port mode function.
SPP
Standard Printer Port
EPP
Enhanced Parallel Port
ECP
Extended Capabilities Port
ECP+EPP
Combination of
ECP and EPP capabilities
Normal
Normal function
PWRON After PWR-Fail
This field sets the system power status whether
on or off
when power
returns to the system from a power failure situation.
Summary of Contents for MB880
Page 4: ...iv MB880 User s Manual This page is intentionally left blank...
Page 8: ...INSTALLATIONS 4 MB880 User s Manual Board Dimensions...
Page 32: ...INSTALLATIONS 28 MB880 User s Manual This page is intentionally left blank...
Page 65: ...DRIVERS INSTALLATION MB880 User s Manual 61 This page is intentionally left blank...