![background image](http://html2.mh-extra.com/html/ibase-technology/mb880/mb880_user-manual_3267963011.webp)
INSTALLATIONS
MB880 User’s Manual
7
ATX Power Installation
The system power is provided to the motherboard with the ATX1 and
ATX_12V power connectors. ATX1 is a 24-pin power connector and
ATX_12V is a 4-pin 12V power connector.
The 24-pin power connector can to be connected to a standard 20-pin
ATX power connector in a standard ATX power supply (Min. 400watt).
Note: The power supply 5VSB voltage must be at least 2A.
Installing the Memory
The MB880 motherboard supports two DDR memory sockets for a
maximum total memory of 2GB in DDR memory type. It supports
DDR333 when installed with CPUs that have clock speeds of 533MHz.
It supports DDR400 when installed with CPUs that have clock speeds of
800MHz. The board provides dual channel functionality for its DIMM
slots. DIMM1 is for one channel and DIMM2 is for another channel.
Basically, the system memory interface has the following features:
Supports two 64-bit wide DDR data channels
Available bandwidth up to 3.2GB/s (DDR400) for single-channel
mode and 6.4GB/s (DDR400) in dual-channel mode.
Supports 128Mb, 256Mb, 512Mb, 1Gb DDR technologies.
Supports only x8, x16, DDR devices with four banks
Registered DIMMs not supported
Supports opportunistic refresh
Up to 16 simultaneously open pages (four per row, four rows
maximum)
Summary of Contents for MB880
Page 4: ...iv MB880 User s Manual This page is intentionally left blank...
Page 8: ...INSTALLATIONS 4 MB880 User s Manual Board Dimensions...
Page 32: ...INSTALLATIONS 28 MB880 User s Manual This page is intentionally left blank...
Page 65: ...DRIVERS INSTALLATION MB880 User s Manual 61 This page is intentionally left blank...