![background image](http://html2.mh-extra.com/html/ibase-technology/mb880/mb880_user-manual_3267963043.webp)
BIOS SETUP
MB880 User’s Manual
39
APIC Mode
APIC stands for Advanced Programmable Interrupt Controller. The
default setting is
Enabled
.
MPS Version Control for OS
This option is specifies the MPS (Multiprocessor Specification) version
for your operating system. MPS version 1.4 added extended
configuration tables to improve support for multiple PCI bus
configurations and improve future expandability. The default setting is
1.4
.
OS Select for DRAM > 64MB
This option allows the system to access greater than 64MB of DRAM
memory when used with OS/2 that depends on certain BIOS calls to
access memory. The default setting is
Non-OS/2
.
Report No FDD For WIN 95
If you are using Windows 95/98 without a floppy disk drive, select
Enabled to release IRQ6. This is required to pass Windows 95/98's SCT
test. You should also disable the Onboard FDC Controller in the
Integrated Peripherals screen when there's no floppy drive in the system.
If you set this feature to Disabled, the BIOS will not report the missing
floppy drive to Win95/98.
Small Logo (EPA) Show
The EPA logo appears at the right side of the monitor screen when the
system is boot up. The default setting is
Enabled
.
Summary of Contents for MB880
Page 4: ...iv MB880 User s Manual This page is intentionally left blank...
Page 8: ...INSTALLATIONS 4 MB880 User s Manual Board Dimensions...
Page 32: ...INSTALLATIONS 28 MB880 User s Manual This page is intentionally left blank...
Page 65: ...DRIVERS INSTALLATION MB880 User s Manual 61 This page is intentionally left blank...