INSTALLATIONS
MB880 User’s Manual
21
ATX Power ON Switch: Pins 7 and 17
This 2-pin connector is an “ATX Power Supply On/Off
Switch” on the system that connects to the power switch on
the case. When pressed, the power switch will force the
system to power on. When pressed again, it will force the
system to power off.
Reset Switch: Pins 9 and 19
The reset switch allows the user to reset the system without
turning the main power switch off and then on again.
Orientation is not required when making a connection to
this header.
Hard Disk Drive LED Connector: Pins 10 and 20
This connector connects to the hard drive activity LED on
control panel. This LED will flash when the HDD is being
accessed.
Pin #
Signal Name
10
HDD Active
20
5V
CPU_FAN1: CPU Fan Power Connector
Pin #
Signal Name
1
Ground
2
+12V
3
Rotation detection
4
Control
Summary of Contents for MB880
Page 4: ...iv MB880 User s Manual This page is intentionally left blank...
Page 8: ...INSTALLATIONS 4 MB880 User s Manual Board Dimensions...
Page 32: ...INSTALLATIONS 28 MB880 User s Manual This page is intentionally left blank...
Page 65: ...DRIVERS INSTALLATION MB880 User s Manual 61 This page is intentionally left blank...