62
COM Express® Carrier Board Design Guide
2.18.3 Power Management Signals
Table 19:
System States S0-S5 Definitions
System State
Description
Power Rail State
S0
Full On
All components are powered and the
system is fully functional.
Full power on all power rails.
S1
Power-on Standby
(POS)
In sleeping state, no system context is lost,
hardware maintains all system context.
During S1 operation some system
components are set into low power state.
Full power on all power rails.
S2
Not supported.
S3
Suspend to RAM
(STR)
The current system state and context is
stored in main memory and all unnecessary
system logic is turned off.
Only main memory and logic required to
wake-up the system remain powered by
the Suspend voltages. All other power
rails are switched off.
S4
Suspend to Disk
(STD) Hibernate
The current system state and context is stored
on disk and all unnecessary system logic is
turned off. S4 is similar to S5 and just
supported by OS.
Similar to S5; All other power rails are
switched off.
S5
Soft Off
In S5 state the system is switched off.
Restart is only possible with the power
button or by a system wake-up event such
as 'Wake On LAN' or RTC alarm.
Suspend power rails are powered. All
other power rails are switched off.
Summary of Contents for ET976
