iB-WRA300N3G
300M Wireless-N ADSL2+ 3G Router User Guide
5
2.2 The Back Panel
Figure
2-2
¾
DSL
: Through ADSL port you can connect the router with the telephone. Or you can connect
them by an external separate splitter. For details, please refer to 2.4.
¾
Wi-Fi
: Press this button for short time, used to Enable/Disable wireless
¾
RESET
: There are two ways to reset the Router's factory defaults.
¾
USB
: Insert 2G/3G compatible data card to configure GSM/CDMA network
¾
Ethernet
: Through the port, you can connect the Router to your PC or the other Ethernet
network devices.
¾
ON/OFF
: Switch ON/ OFF the router.
¾
Reset : You can reset through 2 mode
Method-I
: With the Router powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the Router will reboot to its factory default settings.
Method-II
: Restore the default setting from “Maintenance-SysRestart” of the Router's
Web-based Utility.
2.3 Installation
Environment
¾
The Product should not be located where it will be exposed to moisture or excessive heat.
¾
Place the Router in a location where it can be connected to the various devices as well as to a
power source.
¾
The Router can be placed on a shelf or desktop.
¾
Keep away from the strong electromagnetic radiation and the device of electromagnetic
sensitive.
Summary of Contents for iB-WRA300N3G
Page 1: ...300M Wireless N ADSL2 3G Router Model No iB WRA300N3G User Guide Ver 1 0 0...
Page 11: ...iB WRA300N3G 300M Wireless N ADSL2 3G Router User Guide 7 Figure 2 3...
Page 25: ...iB WRA300N3G 300M Wireless N ADSL2 3G Router User Guide 21 Figure 4 6...
Page 36: ...iB WRA300N3G 300M Wireless N ADSL2 3G Router User Guide 32 Figure 4 14...
