iBall Baton iB-WRA300N3G, User Manual

Page: 10 / 77

iB-WRA300N3G 300M Wireless-N ADSL2+ 3G Router User Guide
6
2.4 Connecting the Router
Before installi n g the device, please make sure your ADSL service / 3G service as provided by your
ISP is available. (For 2G/3G connection verify the SIM service is activated) , if there is any problem
kindly contact your ISP.
Connect the router to the power outlet through power adapter as bundled in the packaging.
Note: Before cable connection, switch off the power supply and keep your hands dry.
ƒ ADSL Connection
Method one: Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on the rear
panel of iB-WRA300N3G, and insert the other end into the wall socket.
Method two
：
You can use a separate splitter. External splitter can divide the data and voice, and
then you can access the Internet and make calls at the same time. The external splitter has three
ports:
• LINE: Connect to the wall jack
• PHONE: Connect to the phone sets
• MODEM: Connect to the ADSL LINE port of iB-WRA300N3G
Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on the rear panel of
iB-WRA300N3G. Connect the other end to the MODEM port of the external splitter.
Step 1: Connect the Ethernet cable. Attach one end of a network cable to your computer’s
Ethernet port or a regular hub/switch port, and the other end to the Ethernet port on the
iB-WRA300N3G.
Step 2: Attach the power adapter. Connect the power adapter to the power connector on the rear
of the device and plug in the adapter to a electrical outlet or power extension. The
electrical outlet shall be installed near the device and shall be easily accessible.
ƒ 3G Connection
Step-I: Plug the RJ45 cable into LAN port (1~4) and another end to your PC or Laptop
Step-II: Plug the 2G/3G USB Modem (Data Card) into the router USB slot
Note: SIM card is inserted properly in USB modem before inserting into the router
Configure the 3G Internet connection in the router as per your ISP connection available.