iBall Baton iB-WRA300N3G, User Manual

Page: 38 / 77

iB-WRA300N3G 300M Wireless-N ADSL2+ 3G Router User Guide
34
There are two options, “20 MHz” and “20/40 MHz”. If bigger bandwidth is selected, device
could transmit and receive data with higher speed.
•
Extension Channel: If “20/40 MHz” is selected, this option will be displayed.
• Guard Interval: Select the guard interval you want from the drop-down list.
•
MCS: Select the wireless transmission rate from the drop-down list. By default, the option
is AUTO.
¾ Multiple SSIDs Settings: These are the settings of the SSID.
• SSID Index: The index of the SSID, and in this model, you can only leave it as a default
value of 1.
•
Broadcast SSID: When wireless clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the Router. To broadcast the
Router’s SSID, keep the default setting. If you don’t want to broadcast the Router’s SSID,
select “No”.
•
Use WPS: Use WPS (Wi-Fi Protected Setup) function, you can add a new wireless
device to an existing network quickly. To Use WPS, keep the default setting, and
configure the parameters in
WPS Settings . If you don’t want to Use WPS, select “No”,
then you will see the screen as shown below.
Figure 4-15
•
SSID: Wireless network name shared among all points in a wireless network. The SSID
must be identical for all devices in the wireless network. It is case-sensitive and must not
exceed 32 characters (use any of the characters on the keyboard). Make sure this setting
is the same for all stations in your wireless network. Type the desired SSID in the space
provided. Multi-SSID can be enabled with separate security setting.
Max. 4 individual SSID can be configured.
•
Authentication Type: Select an authentication type from the drop list, which allows you
to configure security features of the wireless LAN interface. Options available are:
Disabled, WEP-64Bits /128Bits, WPA-PSK, WPA2-PSK, and WPA-PSK/ WPA2-PSK.