IBA ibaPQU-S, Manual

Page: 65 / 127

Manual
Issue 1.5
65
Basic settings

See Power frequency submodule, “General” tab, chapter 10.3.2
“Analog” tab
The Basic submodule captures the following characteristic values:

Power frequency in 200 ms and half period measurement intervals, respectively

For each input: RMS value, peak value, rectified value and frequency in 200 ms
and half period measurement intervals

For each input: Phase angle, form factor, crest factor, measurement interval
200 ms.
In the signal display, the signals are grouped by input. Click the <+> sign before the group
name to show the signals of a group.

Name
The names are set by default but can be edited. To allow an unambiguous identification,
they contain the input channel and the characteristic value. You can additionally assign
two comments by clicking the
icon in the signal name field.

Unit
Display of the relevant unit.

Active
Here you can enable or disable the signal.