IBA ibaPQU-S, Manual

Page: 33 / 127

Manual
Issue 1.5
33
10 Configuration with ibaPDA
10.1 First steps
Start ibaPDA, open the I/O Manager and proceed as follows:
1. Select the
“General” tab and the “Settings” node and set the acquisition timebase on
the left to 1 ms.
2. Look for the corresponding link of the ibaFOB-D card to which ibaPQU-S is con-
nected in the I/O Manager. Right-
click the link to open a submenu. Select “Autode-
tect”.
If ibaPDA detects the device automatically, the device and the connected modules
are listed in the module tree.
3. To configure the ibaPQU-S system manually, proceed as follows:
4. Right-click the connection (link) of the ibaFOB-io-D card to which the device is con-
nected.
5.
Select “Add module”. The list of available modules is displayed. Select “ibaPQU-S”.