Manual
ibaBM-DPM-S-64
20
Issue 2.5
8
System Integration
8.1
ibaBM-DPM-S-64 in the ibaPDA environment
In the following examples, only ibaPDA-V6 is referred to as the receiving system. The
topologies apply analogously to ibaLogic.
8.1.1
Connection to the DP Master (unidirectional)
Figure 3:
ibaBM-DPM-S-64 connected to the DP Master and ibaFOB-4i-D
in the measuring station PC
The configuration shown above illustrates the ibaBM-DPM-S-64 device connected to a
DP Master device (for example the SIMATIC S7). The measured values can be logged
with a stationary ibaPDA-V6 PC using an ibaFOB-D card.
If the device is the last device on the DP line, the corresponding terminating resistor
must be activated (switch S4 is set to ON).
8.1.2
Connection to DP master and other DP slaves (unidirectional)
Figure 4:
ibaBM-DPM-S-64 connected to the DP master, further DP slave devices and
measuring station PC
