ibaBM-PN
Manual
Issue 1.9
51
9.2.8
„Sniffer SiLink“ module
The “Sniffer SiLink” module is only available underneath a TAP node. Each SINAMICS
controller corresponds to one module "Sniffer SiLink" in ibaPDA. Each controller is iden-
tified by its own device number (ID). This is defined in the SINAMICS project engineering.
9.2.8.1 „General“ tab
Figure 32: „Sniffer SiLink“ module – „General“ tab
Basic settings
Module type, Locked, Enabled, Name, Timebase, Use name as prefix
see chapter 9.2.1.1.
Module N
o
.
Logical module no. for clearly referencing of signals, e.g. in expressions in virtual
modules and ibaAnalyzer
Module Layout
No. analog signals
Defining the number of analog signals for this module (default 16)
No. digital signals
Defining the number of digital signals for this module (default 1)
SINAMICS Link
Project
The project determines the number of devices and the number of data words per
device. The following are available:
64 participants, 16 words
16 participants, 16 words
12 participants, 24 words
8 participants, 32 words
Device number
Device number of the controller on the SINAMICS Link